It’s been awhile since I updated anything about the 1965 Rat Beetle. Moving slowly forward but hopefully it can be ready for Safety Inspection this spring/summer.

All of the old (complete!) brake system was thrown in the thrash and replaced with brand new parts. New shocks all around too. New wheel bearings. New hoses, brakelines and every nut/bolt is new in the brakesystem. Fenders have been removed for clean up and new blackbody/ship paint applied to underside. Going to be re-installed with new bolts and seals, anti rust wax etc.

Engine have been worked on also, valves adjusted, new oilsump/gaskets, new: sparkplugs, dist.cap, ignition coil and wiring, rotor, condensator, restored Solex 30-pict carb, new fuel lines everywhere, new exhaust system and all gaskets, restored 12v generator and new Bosch charge relay and 12v generator stand, new fan belt and pulley, new throttle cable etc.

That’s it for now! Next up is transmission overhaul and then test start the engine for first time in 20 years…

To get the new imported Chevy pickup ready for the Swedish roads it needed some work. First it needed Swedish papers and plates and at the same time it must pass a safety inspection by law. This car didnt have turnsignals or working lights so this got fixed. Fueltank was cleaned on the inside and got fresh fuel and hoses & filters. Engine got new sparkplugs and coil installed. Exhaust was installed also. Restored carburetor. New tires and, steering rods. The speedometer was rusted out so a new was mounted. It passed the safety inspection without any problems at all!

1319189683_resized 1319189686_resized 1319189688_resized 1319189690_resized 1319189692_resized 1319189694_resized 1319189696_resized 1319189698_resized