Have now started with the interior on the Highroof bus. Have put sounddeadning mats in floors and doors, sprayed it all with wax for rust protection. Then added insulation (Refectix) a material of aluminium with plasticcells of air in middle. NASA came up with this tecnology when insulating spaceships actually! After this I put some extra 5mm insulation foamboards (green) then 15mm marine plywood and then a new linoleum carpet in Classic checker pattern, went with light grey to match the grey details on furnitures. The furnitures itselfs is in Light Oak wood finish (laminate). I built it all in a special  extra light plywood 15mm. This interior is gona weight nothing!! And thats great in a slow VW bus, all the stuff thats going to be loaded in the cabinets are heavy enought 😉 The kitchen pod/cabinet is featuring a new Vitifrigio fridge on 48 liters + 2 liter freezer. A new small owen in stainless that will be running on 240v (euro). The zink is from a newer crashed/parted out Knaus campervan I bought cheap online. The lid in top is hiding a gastove and the cupboard in bottom will be housing the greywater tank etc.

Still have plenty to do before I can start restoring the 1800cc AP engine.

More to come soon!
#highroofbayproject

Lots of work have been done lately on the VW Baywindow Highroof! Whole roof have been finished  in California White color. All doors and lids have been painted on the insides and then fitted back on the body. All panels are now sanded in 800grit and ready for toppaint in VW L20a Marino Yellow!

#highroofbayproject

Started to get the other side done, blasted, painted and new bearings and seals. Waiting on some new parts from JustKampers and hopefully I can put the bus back on its own wheels this weekend for first time in 6 months. Also fixed the rusted and dented up front floor cover, blasted and painted ready to be installed when all wires and brakes are fixed.
bild183

bild184

bild185

bild186

bild187

bild188

bild189

bild190

bild190b

bild191

Got loads of brand new parts from Justkampers today. Wow what a quick delivery! Basicly a new bus chassi in parts. Removed front beam, torsionarms and brakes. I think every nut and bolt had to be cut, they were froozen stuck! But it dosen’t matter everything going to be replaced with new parts anyway. Need to remove all chassi parts for sandblasting and painting!