A Ruby red 1965 VW type 1 Beetle. Solid project, not much rust at all. Will get new paint and interior, engine overhauled, new chrome trim, new rubber seals and new brake system and more. Pics coming soon and maybe a simple video serie on the YouTube channel. Stay tuned!
The wiring was a mess (for all equipment) so a new control panel with automatic fuses was installed togheter with new wiring. The 230v wiring (camping power) was also updated with automatic ground fuse and two new sockets with combined USB outlets.
The old interior lightbar was only 230v, but it was a great design so you can flip/turn the light angle. So I took it apart and converted it to 12v with LEDs. An extra LED light with two touch dim/settings was mounted up in the front of the sealing/roof also.
Under the rock n roll sofa I made space for 200amp of batteries (dual 100amp). These I connected to the car/start battery thru a relay, so the car alternator will charge all battery’s. These batteries are connected thru Bluetooth to my cellphone so I can see how much power is left and how much is charging. The solar panel (portable 120w) have a quick connection to these battery’s. Also the 5kw diesel heater is installed under the sofa. It takes air from outside and diesel from the main tank, and the exhaust is routed thru a silencer and out. It runs on diesel and 12v so it can be used anywhere for a very longtime, no need for 230v power. It has a digital display, and a thermostat so it will keep the inside toasty warm on winter. It can be started thru GSM net with my phone. I routed the heater outlets to the main floor and one to the back/bed. It works great and produce a lot of warm dry heat!
The walls, doors and roof was already insulated with 50mm cellplastic, thats very good! But I had some extra aluminium/bubblefoile rolls that I put inside some of the doors and walls for some extra insulation and vapor barier.
#vwt3overland
Yeah! The bus is now rolling on its own wheels again, after been standing like a empty shell in the air for 7 months. Still need to route new brakelines and brakehoses, and bleed the whole system. Must also restore the factory installed Eberspracher BA6 heater that are going to be installed under the center floor. But now its time to start with paint and body. The engine compartment and front cab need to get painted in VW L20A Marino yellow first, then I can start working on the outside. Lots of work still left to do, but much have been done on places you normally dont see…
