Got inspired to restore my vintage gaspump a 1958 Ljungmans Star 87. Electricmotor, pump, wires etc was removed by me earlier so just the rest of the stuff needed to be taken apart and cleaned and highpressure washed. Lots of old diesel everywhere. Going to be a BP (British Petroleum) again like it was new 1958.
Behöver du något blästrat och lackerat till bra pris så är det bara att höra av sig på: info@maindrive.org
These rusty wheels got a new life with some sandblasting and new paint!
Got some stuff done on the front beam/axle on the Highroof bus this week. Fitted new grease zerks to the beam, installed a new center swivelpin and bushings, test fitted the new brakebooster, 4 new needlebearings (made a tool so they were easy to pull out). They were seated 8mm inside the tubes. Used a old bearing to knock them in again, and then the tool the last bit. New dustcovers mounted too. Got the axle bolted up in the frame on the bus and during the weekend, I will start installing torsionarms, spindles, tierods etc. The bus starts to look really nice, atleast underneath! 😉 More pics coming soon!
Volkswagens original tool
Been in Barcelona, Spain with the family on a vacation and just got back home. Nice to see some sun instead of snow! 🙂 Going to start put together the front beam axle this week. I have all the new parts from JUSTKAMPERS waiting for it, and hopefully have it bolted back up in the frame on the bus. More pics coming soon!
Some more progress made on the Highroof bus. More parts have been sandblasted and painted during the week. The chassi is finally painted too, after months of hard work. 2k polyurethane paint with elastic attribute. Good if you dont want to have stonechips in the paint later on. Cant wait to start bolting on all the new parts on the shiney chassi, no more dirty work! Also got a NOS 1960-70s roofrack that will get modified to fit on the highroof, perfect for the future solarpanels etc. Got a spare BA6 Eberspacher burner too, will be good to take parts from when I start the restoration of the original one. Here is the pics…
Sandblasted and painted silver metallic. RAL9006.
BEFORE.
DURING. Straightned out and sandblasted baremetal
AFTER. Painted, also made a custom mesh in stainless for it but forgot to take photo.
Marinoyellow VW L20A period correct.
Have sandblasted alot of parts in the new cabinet, so nice to have. No need for waiting on the mediablasting company any more. Just put it in the box and go! Got a box full of new parts from Justkampers.com yesterday too. Brakeservo, starter, all brakepipes, front beam seals, 4 torsionarms with new pressed in balljoints, transmission gaskets and seals etc. Also scored a NOS Eberspächer combustion/airpump for the BA6 heater. Found a supplier in the UK of new BERU glowplugs for BA6, the GZE201 plug replaces the old (original) BZE22. Have anyone tried the new GZE201? Let me know how it worked: info@maindrive.org
Have scraped and cleaned all of the chassi during the last 2 weeks. Hope to push on further with the chassi this week and weekend and get it primered, seam sealed, undercoated and painted in body color. After that the chassi is ready to get all the new parts bolted on! More coming soon…
